| Our high power DLE (direct laser engraving) system was installed in 2013. We can make various seamless printing forms:
1.Rubber cylinder:repeat length < 1500mm, face width < 3100mm, cylinder width < 3500mm
2.Rubber sleeve: repeat length < 1500mm, face width < 2500mm
3.Rubber plate (flat):max. format: 1200X1600mm, 1.14/1.70mm thick
Max. ruling:133 lpi
Max engraving depth for single pass:0.7mm
Material applicable:All kinds of rubber. Rubber is usually much better than polymer in ink/solvent corrosion. |
